FACTORY FLOORS FULL PACK WITH EPOXY PAINT

Advantages of floor polishing with epoxy paint Epoxy

paint is suitable for new concrete surfaces, is not damaged and does not require much exposure to chemicals.
Epoxy paint is classified according to roller system and self-leveling system
Simple construction
Affordable price
High corrosion
resistance Chemical resistance
Withstands large loads, anti-friction…
Covers cracks, pits, protrusions on the top. surface
Can be applied on the old concrete floor surface to increase the aesthetic.
Increases the brightness of the construction space, thereby reducing the cost of installing more lights for businesses.
Smooth, glossy surface finish.
Better floor maintenance.
Increase surface hardness.
Better endurance.
Wear-resistant, dust-free, easy to clean.
Increase the aesthetics of the factory floor at a relatively low cost.
The process of polishing the factory floor:

Step 1: grinding the floor

Using a specialized workshop floor sander in the polishing industry X9 combined with the HF grinding disc (with the heads 20#, 30#).
The purpose of floor scrubbing: removing impurities on the floor surface, regaining the relative flatness of the concrete floor surface, removing the weak layer of concrete above.
Step 2: wet polishing Wet

polishing: replacing the 6G concrete disc (with the numbers 50# and 100#)
Purpose of wet polishing: regaining the smoothness of the floor, creating a smooth surface before coating chemicals penetrate the surface.
Step 3: Vacuum the floor and grind the floor

Use a large capacity industrial vacuum cleaner to clean the surface.
After grinding and the surface has been cleaned, apply a layer of chemicals to penetrate deep inside the surface.
The purpose of floor grinding: hardening the surface, increasing the inertness of the concrete floor surface after polishing.
Step 4: Grind the floor for the second time

After 24 hours, when the hardening chemical layer has fully penetrated into the concrete surface, use the first 200# concrete disc in combination with a high-speed adjustable scrubber to grind the floor for the second time. 2.
Purpose of floor grinding: completely remove excess chemicals on the surface, increase the smoothness and smoothness of the surface.
Step 5: Clean the surface

Surface cleaning: wash with water to ensure that the surface is completely used with numbers greater than 300# then increase the larger numbers (500#, 800#, 1500#, 3000#) depending on the required gloss The factory will use the numbers above.

Step 6: Polish the floor

Use high speed PET stone 2800 - 3000 v/p to re-polish the surface to increase the highest gloss for the workshop floor surface.

NAM PHAT BUSINESS CO., LTD SPECIALIZED IN FLOOR Polishing, EPOXY PAINT, FACTORY REPAIRS AND MAINTENANCE, etc.

FOR CONSULTATION AND PRICE, CONTACT NOW HOTLINE :

Technical advice 1 : 0917 787 428 ( .Nam)

Technical consultant 2: 091 818 5927 (Mr. Year)

Sales staff: 0913 746 519 (Ms. Trang)

Address: 870 Provincial Road 43, Quarter 1, Binh Chieu Ward, Thu City Germany, Ho Chi Minh City

Email: tongthauson@gmail.com

Website: tongthauson.vn